Cisco WS-C2960X-48TD-L 48x Ports RJ-45 2x SFP+ Ethernet Switch
New
Photos are representative. Refurbished units may show light cosmetic wear; all ports and PSUs tested.
CiscoCisco Catalyst 2960 Switches
Cisco WS-C2960X-48TD-L 48x Ports RJ-45 2x SFP+ Ethernet Switch
- Part number
- WS-C2960X-48TD-L
- 48 10/100/1000 Ethernet downlink ports
- Two fixed 10G SFP+ uplink interfaces
- LAN Base software feature set
- FlexStack-Plus supports switch stacking
- FlexStack-Extended supports extended stacking
- 10G uplinks support higher-speed aggregation
CONDITION
Ideal for
48-Port Gigabit Access, 10G Campus Uplinks, LAN Aggregation
Cisco WS-C2960X-48TD-L Catalyst 2960-X Series 2960X-48TD-L 48x Ports 10/100/1000Base-T RJ-45 Gigabit Ethernet 2x Ports 10GBase-X SFP+ 10 Gigabit Ethernet Layer 2 Managed 1U Rack-mountable Ethernet Network Switch
No compatible accessories listed for this product.
| Product Line | Catalyst |
| Product Series | 2960-X |
| Model | 2960X-48T |
| Product Type | Layer 3 Switch |
| POE/POE+ Supports | Non-PoE |
| USB Port | Yes |
| Console Management Port | Yes |
| Quantity of Fixed Ports/Expansion Slots | 48 |
| Quantity of Network Ports | 50 |
| Uplink Port | Yes |
| Stacking Port | Yes |
| Quantity of Expansion Slots | 2 |
| Expansion Slots Details | SFP |
| Quantity of SFP Slots | 2 |
| Quantity of SFP+ Slots | 2 |
| Ethernet Standard | Gigabit Ethernet |
| Media Standard | Twisted Pair,Optical Fiber |
| Technology Standard | 10/100/1000Base-T,1000Base-X |
| Supported Layer Standard | Layer 2 |
| Manageable | Yes |
| MAC Address Table Capacity | 16000 MAC Addresses |
| Jumbo Frames | 9198 Bytes |
| Form Factor | Rack-mountable |
| Airflow Direction | Front-to-Back Airflow |
| Source of Power | AC Power Supply |
| Redundant Source of Power | Yes |
| Installed PSU | 1 |