Cisco SFP-H25G-CU1M 25GBASE-CR1 SFP28 1m Network Cable
New
Photos are representative. Refurbished units may show light cosmetic wear; all ports and PSUs tested.
CiscoNetwork Cables
Cisco SFP-H25G-CU1M 25GBASE-CR1 SFP28 1m Network Cable
- Part number
- SFP-H25G-CU1M
Benefits
- 25GBASE-CR1 passive copper cable
- SFP28 form factor at both ends
- 1-meter direct-attach copper assembly
- 1W maximum power consumption
- Supports 25GbE SFP28 interfaces
- IEEE 802.3by/802.3cc compliance
CONDITION
Ideal for
25G Server DAC, Data Center Leaf, SFP28 Direct Attach
Cisco SFP-H25G-CU1M 25GBASE-CR1 SFP28 1m direct-attach copper cable 1W maximum power consumption DAC Cable
Overview
Cisco SFP-H25G-CU1M is a 1-meter 25GBASE-CR1 passive copper SFP28 direct-attach cable for very short 25GbE connections between compatible switch, server and storage ports.
Application & Use Cases
- 25GbE server-to-switch links
- Top-of-rack connectivity
- Data center rack interconnects
- Short-reach storage networking
- High-density SFP28 connections
Features
- 25GBASE-CR1 passive copper
- 1-meter cable length
- SFP28 connector interfaces
- Direct-attach cable design
- No host FEC required at 1m
Benefits
- 1m length suits dense rack layouts
- Passive copper simplifies short links
- 25G bandwidth supports high-speed servers
- SFP28 ends simplify port connectivity
- Low-power design suits dense racks
- Ideal for very short data paths
Key Specifications
- Standard: 25GBASE-CR1
- Data Rate: 25Gbps
- Form Factor: SFP28
- Cable Type: Passive direct-attach copper
- Length: 1 meter
- Connector: SFP28 to SFP28
- FEC: Not required for 1m cable
No compatible accessories listed for this product.