Cisco NIM-2MFT-T1/E1= 2-Port T1/E1 Multiflex NIM Module
New
Photos are representative. Refurbished units may show light cosmetic wear; all ports and PSUs tested.
CiscoCisco Expansion Modules
Cisco NIM-2MFT-T1/E1= 2-Port T1/E1 Multiflex NIM Module
- Part number
- NIM-2MFT-T1/E1=
- Two-port Multiflex T1/E1 interface module
- Supports voice and clear-channel data
- Supports T1 and E1 WAN circuits
- Supports fractional T1/E1 services
- Designed for Cisco ISR NIM slots
- Supports PVDM-based voice processing
CONDITION
Ideal for
T1/E1 WAN, Branch Voice, Legacy Carrier Links, ISR Voice Gateways
Cisco NIM-2MFT-T1/E1= 4000 Series 2-Port Multiflex Trunk T1/E1 module supporting voice and clear-channel data applications Network Interface Module
Overview
Cisco Fourth-Generation 2-port Multiflex Trunk T1/E1 Network Interface Module for Cisco ISR 4000 Series routers, supporting clear-channel data and voice T1/E1 connectivity.
Application & Use Cases
- Branch-office T1/E1 WAN connectivity
- Voice gateway deployments
- PBX and PSTN connectivity
- Clear-channel T1/E1 data services
- Survivable branch voice infrastructure
Features
- Two T1/E1 ports
- Multi-flex trunk architecture
- Clear-channel data support
- T1 and E1 voice support
- H.323, SIP, MGCP and SCCP environments
- PVDM4 DSP support for voice
Benefits
- Two ports consolidate T1/E1 WAN interfaces
- Supports both data and voice applications
- Clear-channel operation supports WAN services
- Integrates voice into ISR 4000 platforms
- PVDM4 enables supported voice services
- Useful for branch T1/E1 deployments
Key Specifications
- Platform: Cisco ISR 4000 Series
- Module Type: T1/E1 Multiflex Trunk NIM
- Ports: 2
- Interfaces: T1 / E1
- Data: Clear-channel T1/E1
- Voice: Supported
- Channelized Data: Not supported on MFT variant
- DSP: PVDM4 required for voice
- Software: Cisco IOS XE
No compatible accessories listed for this product.
| Product Series | 4000 |
| Product Type | Router |