Cisco MS225-48-HW 48x Ports RJ-45 4x SFP+ Network Switch
Refurbished
Photos are representative. Refurbished units may show light cosmetic wear; all ports and PSUs tested.
CiscoCisco Meraki MS Series Switches
Cisco MS225-48-HW 48x Ports RJ-45 4x SFP+ Network Switch
- Part number
- MS225-48-HW
Benefits
- 48 Gigabit Ethernet ports support dense LAN access
- Four SFP+ uplinks support high-speed aggregation
- Cloud management simplifies centralized switch operations
- Layer 7 application visibility improves traffic insight
- Virtual stacking simplifies distributed switch management
- Integrated security features support enterprise LANs
CONDITION
Ideal for
Campus Access, Enterprise Edge, Branch Networks, Cloud-Managed LANs, High-Density Gigabit Access
Cisco MS225-48-HW Meraki MS225 48x Ports 10/100/1000Base-T RJ-45 4x Ports 10GBase-X SFP+ 2x Stacking Port Layer 3 Network Switch
Overview
Cisco Meraki MS225-48 is a cloud-managed Layer 2 access switch with 48 x 1GbE RJ45 access ports and 4 x 10GbE SFP+ uplinks. The platform supports centralized dashboard management, Layer 2 switching, static routing, ACLs, 802.1X, DHCP snooping, DHCP relay, VRRP warm spare redundancy, and physical stacking up to 80 Gbps.
Application & Use Cases
- Campus access switching for high-density Gigabit Ethernet endpoints
- Enterprise branch and office network access
- Server and workstation aggregation at the access layer
- 10GbE uplink connectivity to distribution switches
- Cloud-managed networks requiring centralized visibility
- Layer 2 access with static routing and security controls
Features
- 48 x 1GbE RJ45 access interfaces
- 4 x 10GbE SFP+ uplink interfaces
- 80 Gbps physical stacking bandwidth
- Stacking support with up to eight compatible switches
- IPv4 and IPv6 ACL support
- 802.1X authentication and DHCP snooping
- Cloud-based dashboard management and zero-touch provisioning
- Warm spare redundancy using VRRP
Benefits
- 48-port Gigabit density for campus access
- Four 10GbE uplinks reduce access bottlenecks
- 80 Gbps stacking supports scalable deployments
- Cloud management simplifies switch administration
- 802.1X strengthens endpoint access control
- VRRP warm spare supports switch redundancy
Key Specifications
- Series: Meraki MS225
- Switch Type: Cloud-managed Layer 2 access switch
- Access Ports: 48 x 1GbE RJ45
- Uplinks: 4 x 10GbE SFP+
- Stacking: Physical stacking
- Stacking Bandwidth: 80 Gbps
- Stack Size: Up to 8 compatible switches
- Routing: Layer 2 with static routes
- Security: IPv4/IPv6 ACL, 802.1X
- Management: Cisco Meraki Dashboard
No compatible accessories listed for this product.
| Product Line | Meraki |
| Product Series | MS225 |
| Model | MS225-48 |
| Product Type | Layer 3 Switch |
| POE/POE+ Supports | Non-PoE |
| USB Port | No |
| Console Management Port | No |
| Quantity of Fixed Ports/Expansion Slots | 52 |
| Quantity of Network Ports | 52 |
| Stacking Port | Yes |
| Quantity of Expansion Slots | 4 |
| Expansion Slots Details | SFP+ |
| Quantity of SFP+ Slots | 4 |
| Ethernet Standard | Gigabit Ethernet,10 Gigabit Ethernet |
| Media Standard | Optical Fiber,Twisted Pair |
| Technology Standard | 10/100/1000Base-T,10GBase-X |
| Supported Layer Standard | Layer 2 |
| Manageable | Yes |
| MAC Address Table Capacity | 32000 MAC Addresses |
| Jumbo Frames | 9018 Bytes |
| Form Factor | Rack-mountable |
| Supported Rack | 1U |
| Compliance Standards | RoHS,WEEE |
| Airflow Direction | Front-to-Back Airflow |
| Source of Power | AC Power Supply |
| Installed PSU | 1 |