Cisco C1300-48T-4G-RF Catalyst 1300 48-Port GE 4x 1G SFP Switch
Refurbished
Photos are representative. Refurbished units may show light cosmetic wear; all ports and PSUs tested.
CiscoCisco Catalyst 1300 Switches
Cisco C1300-48T-4G-RF Catalyst 1300 48-Port GE 4x 1G SFP Switch
- Part number
- C1300-48T-4G-RF
- 48 Gigabit ports provide dense wired connectivity
- Four SFP interfaces support fiber uplinks
- Non-PoE design suits data-only networks
- 104Gbps switching supports wire-speed access
- Layer 3 routing enables inter-VLAN traffic
- Stacking supports unified switch administration
CONDITION
Ideal for
Campus Edge, SMB Access, Wiring Closets, Fiber Distribution
Cisco C1300-48T-4G-RF Catalyst 1300 Series 48x 10/100/1000 ports 4x Gigabit SFP uplinks Rack-mountable Managed Switch
Overview
Cisco Catalyst 1300 48-port managed Gigabit Ethernet switch with four Gigabit SFP uplinks. Its non-PoE architecture targets dense wired access and fiber aggregation where endpoint power is not required.
Application & Use Cases
- Dense wired access
- Branch network aggregation
- Gigabit fiber distribution
Features
- 48 × 10/100/1000BASE-T ports
- 4 × Gigabit SFP uplinks
- Layer 3 routing
- Front-panel stacking
- Rack-mountable design
Key Specifications
- Access: 48 × Gigabit Ethernet
- Uplinks: 4 × Gigabit SFP
- PoE: None
- Switching Capacity: 104Gbps
- Forwarding: 77.38Mpps
No compatible accessories listed for this product.
| Product Line | Catalyst |
| Product Series | 1300 |
| POE/POE+ Supports | Non-PoE |
| USB Port | Yes |
| Console Management Port | Yes |
| Quantity of Fixed Ports/Expansion Slots | 48 |
| Quantity of Network Ports | 52 |
| Stacking Port | No |
| Quantity of SFP Slots | 4 |
| Supported Layer Standard | Layer 2/3 |
| Manageable | Yes |
| MAC Address Table Capacity | 16000 MAC Addresses |
| Jumbo Frames | 9000 Bytes |
| Source of Power | AC Power Supply |
| Installed PSU | 1x Internal AC |