Cisco C1300-48FP-4G-RF Catalyst 1300 48-Ports PoE+ 4x 1G SFP Switch
Refurbished
Photos are representative. Refurbished units may show light cosmetic wear; all ports and PSUs tested.
CiscoCisco Catalyst 1300 Switches
Cisco C1300-48FP-4G-RF Catalyst 1300 48-Ports PoE+ 4x 1G SFP Switch
- Part number
- C1300-48FP-4G-RF
- 48 PoE+ ports support dense powered endpoints
- 740W budget supports extensive PoE deployment
- Four SFP uplinks support fiber aggregation
- 30W ports support higher-power network devices
- 104Gbps switching supports wire-speed access
- Layer 3 routing supports segmented networks
CONDITION
Ideal for
High-Density Campus Edge, Wireless APs, IP Phones, Surveillance
Cisco C1300-48FP-4G-RF Catalyst 1300 Series 48-Ports 10/100/1000 PoE+ 740W 4x 1G SFP Ports 104 Gbps Switching Capacity 77.38 Mpps Forwarding Rate Managed Network Switch
Overview
Cisco Catalyst 1300 48-port managed Gigabit PoE+ switch with four Gigabit SFP uplinks and a 740W PoE budget. It targets high-density powered access deployments.
Application & Use Cases
- High-density PoE access
- IP phone and AP networks
- IP surveillance
Features
- 48 × 10/100/1000 PoE+ ports
- 4 × Gigabit SFP
- 30W per PoE+ port
- 740W PoE budget
- Layer 3 switching
Key Specifications
- Access: 48 × Gigabit PoE+
- PoE Budget: 740W
- PoE: 802.3af/at
- Uplinks: 4 × Gigabit SFP
- Switching Capacity: 104Gbps
- Forwarding: 77.38Mpps
No compatible accessories listed for this product.
| Product Line | Catalyst |
| Product Series | 1300 |
| POE/POE+ Supports | PoE+ |
| USB Port | Yes |
| Console Management Port | Yes |
| Quantity of Fixed Ports/Expansion Slots | 48 |
| Quantity of Network Ports | 52 |
| Stacking Port | No |
| Quantity of SFP Slots | 4 |
| PoE Budget | 740 Watts |
| Supported Layer Standard | Layer 2/3 |
| Manageable | Yes |
| MAC Address Table Capacity | 16000 MAC Addresses |
| Jumbo Frames | 9000 Bytes |
| Source of Power | AC Power Supply |
| Installed PSU | 1x Internal AC |