Cisco ASR1002X-20G-K9 is an ASR 1002-X aggregation services router configured for 20 Gbps forwarding performance. It integrates the route processor, Embedded Services Processor and SIP, with six built-in Gigabit Ethernet SFP interfaces, three SPA slots, Cisco IOS XE and AES-capable security for enterprise WAN, service-provider and edge routing deployments.

• Enterprise WAN aggregation and edge routing
• Service-provider network aggregation
• Internet edge and high-performance routing
• Metro Ethernet and broadband aggregation
• VPN and encrypted WAN connectivity
• Multi-service provider edge deployments
• High-density SPA-based interface expansion
• Redundant enterprise routing architectures

• 20 Gbps licensed ESP performance accelerates packet forwarding
• Six built-in SFP ports support Gigabit Ethernet connectivity
• Three SPA slots expand WAN and service interfaces
• Integrated ESP eliminates a separate processing module
• AES capability supports encrypted IPsec WAN traffic
• Dual power supplies support chassis-level power redundancy

• Cisco ASR 1002-X aggregation services router platform
• 20 Gbps software-activated ESP performance configuration
• Integrated quad-core route processor
• Integrated Embedded Services Processor
• Integrated SIP with three SPA slots
• Six built-in Gigabit Ethernet SFP ports
• Cisco IOS XE Software architecture
• AES technology package license
• IPsec and advanced WAN security capabilities
• Software redundancy and Nonstop Forwarding support
• Online Insertion and Removal support for supported components

• Product Type: Aggregation Services Router
• Series: Cisco ASR 1000 Series
• Model: ASR 1002-X
• Performance: 20 Gbps licensed ESP throughput
• Default ESP Performance: 5 Gbps
• ESP Upgrade: Software activation to 10, 20 or 36 Gbps
• Built-in Network Ports: 6 x Gigabit Ethernet SFP
• 10GbE Built-in Ports: None
• SPA Slots: 3 single-height SPA slots
• Route Processor: Integrated ASR 1002-X quad-core processor
• ESP: Integrated ASR 1002-X ESP
• SIP: Integrated
• Maximum Physical Interface Capacity: Up to 30 Gigabit Ethernet
• Maximum 10GbE Interface Capacity: Up to 3 through supported SPA configurations
• Default DRAM: 4 GB shared across RP, ESP and SIP
• Maximum DRAM: 16 GB
• Storage: 8 GB EUSB
• Operating System: Cisco IOS XE Software
• Technology Package: FLASR1-AES
• Performance License: FLSA1-2X-5-20G
• Encryption: AES 128-, 192- and 256-bit support
• IPsec: Supported
• Software Redundancy: Supported with required 8 GB DRAM
• NSF: Nonstop Forwarding supported
• SSO: Stateful Switchover support through supported configurations
• Power: Dual AC or dual DC power supplies
• Power Redundancy: Two redundant power entry modules
• Maximum Input Power: Up to 590 W depending on power configuration
• Form Factor: 2U rack-mount router
• Dimensions: 88.9 × 437.4 × 461.0 mm
• Weight: 17.36 kg with dual AC power supplies and SPA blanks