Cisco AIR-ANT2524V4CR-RF Aironet 2.4/5GHz 4dBi Antenna
Refurbished
Photos are representative. Refurbished units may show light cosmetic wear; all ports and PSUs tested.
CiscoCisco Antennas
Cisco AIR-ANT2524V4CR-RF Aironet 2.4/5GHz 4dBi Antenna
- Part number
- AIR-ANT2524V4CR-RF
- Four ports support multi-radio AP architecture
- 2/4dBi gain supports dual-band indoor coverage
- Omnidirectional pattern provides broad horizontal RF
- 36in plenum cables simplify ceiling deployment
- Four RP-TNC connectors match compatible APs
- Ceiling mount supports enterprise WLAN layouts
CONDITION
Ideal for
Indoor WLAN, Ceiling AP, Enterprise Office, MIMO Wi-Fi
Cisco AIR-ANT2524V4CR-RF Aironet dual-band antenna designed for 2.4GHz and 5GHz Cisco wireless access point deployments Antenna
Overview
Cisco Aironet four-port dual-band ceiling-mount omnidirectional antenna family. Exact RF PID is a Cisco Refresh configuration; Cisco documentation identifies the corresponding AIR-ANT2524V4C family specifications.
Application & Use Cases
- Indoor ceiling WLAN
- Multi-radio access points
- Enterprise office wireless
- Dual-band omnidirectional coverage
Features
- 4 dual-band ports
- Ceiling-mount omnidirectional design
- 2-dBi 2.4GHz gain
- 4-dBi 5GHz gain
- Four RP-TNC cables
Key Specifications
- Type: Ceiling-mount omnidirectional
- Ports: 4
- Frequency: 2.4–2.484 / 5.15–5.85 GHz
- Gain: 2 / 4 dBi
- VSWR: 2:1
- Polarization: Linear
- Azimuth: Omnidirectional
- Elevation: 69° / 60°
- Connector: 4 × RP-TNC male
- Cable: 36-in plenum rated
- Dimensions: 7.25 × 7.25 × 1 in
- Mount: Ceiling
No compatible accessories listed for this product.
| Product Line | Aironet |
| Product Type | Antenna |
| Directivity | Omni-directional |
| Antenna Gain | 4 dBi |
| Frequency |
|
| Connector Type | RP-TNC |
| Form Factor | Ceiling Mount |
| Application/Usage | Outdoor |